The Infinity® Sunpanel is a LED blinder panel with 150 x 3W Osram OSLON LEDs, arranged in a 10×15 matrix and pixel pitch of 80mm. The 25,5mm narrow lenses and its powerful 2400° Kelvin 3W LEDs, create a wall of punchy blinders, generating amazing volumetric graphics. Each LED is driven by state-of-the-art drivers, offering a perfectly smooth dimming curve from zero to full on, without any gaps or steps.
Its rugged mesh construction, with 6 detachable modules, enables various creative possibilities by placing other fixtures behind or through the mesh panel. Furthermore, the dedicated rigging bar, which can hold 6 Sunpanels, allows you to set an angle up to 15° in both directions between individual panels (in steps of 5°).
The Infinity® Sunpanel LED blinder is IP-54 certified and equipped with Neutrik PowerCON TRUE1 and Neutrik 3 & 5-pole waterproof chassis connections. It can be controlled by DMX, but it also has RDM and Artnet functionalities (for an easy setup for Arkaos VJ software, the Klingnet protocol has been integrated too).
A built-in Ethernet switch makes it possible to easily daisy chain your data network, where other, external switches or routers, are no longer needed. All settings are created easily via an intuitive menu structure on a large color display.
When a new level of brightness is needed, the Infinity® Sunpanel LED blinder is the ultimate tool for light designers.
Infinity iPW-150 LED Sunpanel specifications
• LED System: 150x Osram Oslon LED 3W
• Drive Current: 700mA
• Output: 21.000 lumen
• Color temperature: 2400K
• Refresh rate: 7800Hz
• Power Supply: 100-240 VAC, 50/60Hz
• Power Consumption: 600W Max
• Control Mode: DMX512, RDM, Artnet, Klingnet
• DMX channels: 150, 8, 4
• Dimmer: 0-100%
• Max strobe freq.: 30Hz
• Field Angle: 9 degrees
• Lens diameter: 25,5mm
• Pixels: 10Hx15V
• Pixelpitch: 80mm
• Dimensions: 1226 x 796 x 190mm
• Weight: 32Kg
• Housing: Modules, die cast aluminum
• Frame, Aluminum extrusion
• Color: Modules, black powder coated
• Frame, black anodization
vPower Connectors: Neutrik PowerCON TRUE1 in-& output
• DMX Connectors: Neutrik XLR 3 + 5pole
• Data Connectors: RJ-45 In-& output
• Cooling: Convection
• Operation temperature: -20~40°C
• Protection: IP-54